Victron SmartSolar MPPT 150/85-MC4 (12/24/36/48V-85A) Charge Controller
Victron Energy – SmartSolar Series
Featured Highlights:
• Ultra-fast Maximum Power Point Tracking (MPPT)
• Advanced Maximum Power Point Detection in case of partial shading conditions
• Outstanding conversion efficiency
• Flexible charge algorithm
• Extensive electronic protection
• Internal temperature sensor
• Bluetooth Smart built-in: dongle not needed
• VE.Direct
• Remote on-off
• Programmable relay
• Optional: pluggable LCD display
Extensive electronic protection: Over-temperature protection and power derating when the temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Description
SmartSolar Charge Controller MPPT 150/85-MC4
Specifications:
Battery voltage: 12/24/48V Auto Select
Rated charge current: 85A
Maximum PV power, 12V 1a,b): 1200W
Maximum PV power, 24V 1a,b): 2400W
Maximum PV power, 48V 1a,b): 4900W
Maximum PV short circuit current 2): 70A
Maximum PV open circuit voltage: 150V absolute maximum coldest conditions – 145V start-up and operating maximum
Maximum efficiency : 98%
Self-consumption: Less than 35mA@12V / 20mA@48V
Charge voltage ‘absorption’: Default setting: 14,4/28,8/43,2/57,6V (Adj.)
(adjustable with: rotary switch, display, VE.Direct or Bluetooth)
Charge voltage ‘float’: Default setting: 13,8/27,6/41,4/55,2V (Adjust.)
(adjustable with: rotary switch, display, VE.Direct or Bluetooth)
Charge algorithm: multi-stage adaptive
Temperature compensation: -16 mV/-32 mV/-68mV/ °C
Protection: Battery reverse polarity (fuse-not user accessible)
PV reverse polarity/Output short circuit/Over temperature
Operating temperature: -30 to +60°C (full rated output up to 40°C)
Humidity: 95%, non-condensing
Data communication port and remote on-off: VE.Direct or Bluetooth
Remote on/off: Yes (2 pole connector)
Programmable relay: DPST AC rating: 240VAC/4A DC rating: 4A up to 35VDC, 1A up to 60VDC.
Parallel operation: Yes (not synchronized)
ENCLOSURE
Colour: Blue (RAL 5012)
PV terminals 3): 35 mm² / AWG2 (Tr models)
Three sets of MC4 connectors (MC4 models)
Battery terminals: 35mm²/ AWG2
Protection cat.: IP43 (electronic components), IP22 (connection area)
Weight: 4,5 Kg
Dimensions (h x w x d) in mm: Tr models: 216 x 295 x 103
MC4 models: 246 x 295 x 103
STANDARDS
Safety EN/IEC 62109
1a) If more PV power is connected, the controller will limit input power to the stated maximum.
1b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V
2) A PV array with a higher short-circuit current may damage the controller.
3) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels. Maximum current per MC4 connector: 30A
Download Datasheet: SmartSolar-MPPT-150-85-150-100-screw or MC4-PV connection-data-sheet