Victron SmartSolar MPPT 150/100-MC4 (12/24/36/48V-100A) Charge Controller

Victron Energy – SmartSolar Series

Featured Highlights:
•  Ultra-fast Maximum Power Point Tracking (MPPT)
•   Advanced Maximum Power Point Detection in case of partial shading conditions
•   Outstanding conversion efficiency
•   Flexible charge algorithm
•   Extensive electronic protection
•   Internal temperature sensor
•   Bluetooth Smart built-in: dongle not needed
•   VE.Direct
•   Remote on-off
•   Programmable relay
•   Optional: pluggable LCD display

Extensive electronic protection:  Over-temperature protection and power derating when the temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.



SmartSolar Charge Controller                        MPPT 150/100-MC4

Battery voltage:                                                        12/24/48V Auto Select
Rated charge current:                                                           100A
Maximum PV power, 12V 1a,b):                                        1450W
Maximum PV power, 24V 1a,b):                                       2900W
Maximum PV power, 48V 1a,b):                                       5800W
Maximum PV short circuit current 2):                               70A
Max PV open circuit voltage:  •150V absolute max coldest conditions
•145V start-up and operating maximum

Maximum efficiency :                                                            98%
Self-consumption:                                Less than 35mA@12V / 20mA@48V
Charge voltage ‘absorption’: Default setting: 14,4/28,8/43,2/57,6V (Adj.)
                                            (adjustable with: rotary switch, display, VE.Direct or Bluetooth)
Charge voltage ‘float’:        Default setting: 13,8/27,6/41,4/55,2V (Adjust.)
                                           (adjustable with: rotary switch, display, VE. Direct or Bluetooth)
Charge algorithm:                                               multi-stage adaptive
Temperature compensation:                       -16 mV/-32 mV/-68mV/ °C
Protection:                •Battery reverse polarity (fuse-not user accessible)
•PV reverse polarity / •Output short circuit / •Over temperature
Operating temperature:    -30 to +60°C (full rated output up to 40°C)
Humidity:                                                              95%, non-condensing
Data communication port and remote on-off:      VE.Direct or Bluetooth
Remote on/off:                                                         Yes (2 pole connector)
Programmable relay:                                   • DPST  AC rating: 240VAC/4A • DC rating: 4A up to 35VDC, 1A up to 60VDC.
Parallel operation:                                             Yes (not synchronized)

Colour:                                                                        Blue (RAL 5012)
PV terminals 3):                                           • 35 mm² / AWG2 (Tr models)                                                      • Three sets of MC4 connectors (MC4 models)
Battery terminals:                                                35mm²/ AWG2
Protection cat.:      IP43 (electronic components), IP22 (connection area)
Weight:                                                                             4,5 Kg
Dimensions (h x w x d) in mm:                • Tr models: 216 x 295 x 103
• MC4 models: 246 x 295 x 103

Safety                                                                        EN/IEC 62109
1a) If more PV power is connected, the controller will limit input power to the stated maximum.
1b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V
2) A PV array with a higher short-circuit current may damage the controller.
3) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels.  Maximum current per MC4 connector: 30A

Download Datasheet: SmartSolar-MPPT-150-85-150-100-screw or MC4-PV connection-data-sheet