Victron BlueSolar MPPT 75V/10A – (12/24V-10A) Charge Controller
Victron Energy – BlueSolar Series
Featured Highlights:
• Ultra-fast Maximum Power Point Tracking (MPPT)
• Advanced Maximum Power Point Detection in case of partial shading conditions
• Load output on the small models
• Battery Life: intelligent battery management by load shedding
• Automatic battery voltage recognition
• Flexible charge algorithm
• Over-temperature protection and power de-rating when the temperature is high.
Color Control GX
All Victron Energy MPPT Charge Controllers are compatible with the Color Control GX: The Color Control GX provides intuitive control and monitoring for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattro’s, MPPT 150/70, BMV-600 series, BMV-700 series, Skylla-i, Lynx Ion and even more.
Download Datasheet: Blue-Solar-Charge-Controller-MPPT-75-10-75-15-100-15-Data Sheet
Description
Specifications:
BlueSolar Charge Controller MPPT 75/10
Battery voltage 12/24V Auto Select
Rated charge current 10A
Maximum PV power, 12V 1a,b) 135W
Maximum PV power, 24V 1a,b) 270W
Max. PV short circuit current 2) 10A
Automatic load disconnect Yes, maximum load 15A
Maximum PV open circuit voltage 75V
Peak efficiency 98%
Self-consumption 10 mA
Charge voltage ‘absorption’ 14,4V / 28,8V (adjustable)
Charge voltage ‘float’ 13,8V / 27,6V (adjustable)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. -32 mV / °C
Continuous/peak load current 15A / 50A
Low voltage load disconnect 11,1V / 22,2V or 11,8V / 23,6V
or Battery Life algorithm
Low voltage load reconnect 13,1V / 26,2V or 14V / 28V
or Battery Life algorithm
Protection: Battery reverse polarity (fuse)
Output short circuit / Over temperature
Operating temperature -30 to +60°C (full rated output up to 40°C)
Humidity 95%, non-condensing
Data communication port VE.Direct
* See the data communication white paper on our website
ENCLOSURE
Colour Blue (RAL 5012)
Power terminals 6 mm² / AWG10
Protection category IP43 (electronic components), IP22 (connection area)
Weight 0,5 kg
Dimensions (h x w x d) 100 x 113 x 40 mm
STANDARDS
Safety EN/IEC 62109
1a) If more PV power is connected, the controller will limit input power to the stated maximum.
1b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V
2) A PV array with a higher short-circuit current may damage the controller