Victron BlueSolar MPPT 150/70-CAN (12/24/36/48V-70A) Charge Controller

Victron Energy – BlueSolar Series

Featured Highlights:
•  
PV voltage up to 150 V
•  Ultra-fast Maximum Power Point Tracking (MPPT)
•   Advanced Maximum Power Point Detection in case of partial shading conditions
•   Outstanding conversion efficiency
•   Flexible charge algorithm
•   Programmable auxiliary relay
•   Extensive electronic protection
•   CAN bus

Extensive electronic protection:  Over-temperature protection and power derating when the temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

 

Description

BlueSolar Charge Controller                          MPPT 150/70-CAN

Specifications:

Nominal Battery voltage:                                    12/24/36/48V Auto Select
Rated charge current:                                                     70A@40°C (104°F)
Maximum solar array input power:                 12V:1000W / 24V: 2000W /
36V: 3000W / 48v: 4000W
Maximum PV open circuit voltage:  150V absolute maximum coldest conditions – 145V start-up and operating maximum
Minimum PV voltage:  Battery voltage plus 7 V to start / Battery voltage plus 2V operating.
Standby power consumption:  12V: 0,55W / 24V: 0,75W / 36V: 0 ,90W/ 48V: 1,00W
Efficiency at full load:  12V: 95% / 24V: 96,5% / 36V: 97% / 48V: 97,5%   Absorption Charge:                                                14.4 / 28.8 / 43.2 / 57.6V   Float Charge:                                                             13.7 / 27.4 / 41.1 / 54.8V   Equalization Charge:                                                  15.0 / 30.0 / 45 / 60V     Remote Battery temperature sensor:                                       Yes
Default Temp. compensation setting:         -2,7 mV/°C per 2V battery cell
Remote on/off:                                                                               Yes
Programmable relay:                                      DPST  AC rating: 240VAC/4A  DC rating: 4A up to 35VDC, 1A up to 60VDC
Communication port:   VE.Can:  two paralleled RJ45 connectors, NMEA 2000 protocol
Parallel operation:           Yes, through VE.Can. Max 25 units in parallel
Operating temperature:     -40°C to 60°C with output current derating above 40°C.
Cooling:                                                                  Low noise fan assisted
Humidity (non-condensing):                                       Max. 95%
Terminal size:                                                            35mm² / AWG2
Material and colour:                                      Aluminium, blue RAL 5012
Protection class:                                                                     IP20
Weight:                                                                                    4,2 Kg
Dimensions (h x w x d):                                            350 x 160 x 135mm
Mounting:                                                   Vertical wall mount – Indoor only
Safety:                                                                             EN/IEC 62109-1
EMC:                                                                   EN 61000-6-1, EN 61000-6-3
1)  If more solar power is connected, the controller will limit input power to the stated maximum.

Download Datasheet: Blue-Solar-Charge-Controller-MPPT-150-70-150-85-CAN-DataSheet