Kwiksol – 150L direct solar geyser
Solar Water Heater Product Features
The Kwikot Kwiksol Solar Water Heater Direct System complies with SANS 1307, is SABS 400kPA approved and can be used as a close coupled system or split system
The inner cylinder is manufactured from 2mm steel and thermo fused porcelain enamelled for cylinder longevity and hygiene
Polyurethane insulation between the inner cylinder and outer casement reduces energy and heat loss
2 x alluminium sacrificial anodes are fitted for corrosion protection
The Solar Water Heater is designed for domestic hot water application in conjunction with one or more solar collector panels
Warranty: 5 years
The direct system is used in frost free locations, where the ambient temperature never falls below 5 degrees and where water quality is good (less than 600ppm Total dissolved Solids/Minerals). The system is used with one or two Solar Collector Panels dependent on size of the tank.
The direct system, can be installed as a split system (pumped or thermosyphoned circulation methods), where the solar water heater is installed inside the roof away from the solar collector panels or installed as a close coupled system, where the solar water heater is installed outside on the roof and above or higher than the solar collector panels.