Solar-Log

  • R1,871.82

    Solar-Log Split CT 250A

    Functions
    Local monitoring
    Local graphical reports via a web browser
    LCD-Status-Display
    Status display for installation and operations.
    Solar-Log™ Easy Installation
    The inverter detection and Internet registration are carried out immediately. The installation
    mode is indicated on the LCD-Status-Display. It is possible to configure the Solar-Log® via
    the PC Web interface.

    Add to cart
  • R2,001.26

    Solar-Log Split CT 100A

    Functions
    Local monitoring
    Local graphical reports via a web browser
    LCD-Status-Display
    Status display for installation and operations.
    Solar-Log™ Easy Installation
    The inverter detection and Internet registration are carried out immediately. The installation
    mode is indicated on the LCD-Status-Display. It is possible to configure the Solar-Log® via
    the PC Web interface.

    Add to cart
  • R3,646.41

    Solar-Log 3 Phase Meter, MID, RS485 Current Transformer-connected

    A power meter relays the measured amount of power to the Solar-Log™ for analysis.

    If you wish to consume the self-produced power from a PV plant, the meter serves as a consumption meter, displaying a comparison of the power produced and consumed.

     

    The meter can be configured to operate with the Solar-Log™ in three different modes:

     

    1. Measuring power consumption for the optimal utilization of self-produced power.
    2. Measuring the total amount of power that has been fed into the grid.
    3. Measuring the power production from inverters that are not directly supported by Solar-Log

     

    This is the CT version of the PRO380 energy meter.

    Use the Solar-Log CTs with this meter; rated from 100-500A.

    Add to cart
  • R6,022.11

    Solar-Log 300 Monitoring System <15kW

    The low cost failure and yield monitoring system for plants with a maximum power of 15 kWp. Includes alarm function and graphic evaluation on PC.
    Plants size
    The Solar-Log 300 can be installed in plants with a maximum total power of 15 kWp, regardless of the number of inverters. Therefore, this new model can monitor smaller plants with two or three inverters of the same manufacturers without any problems.
    Functions
    Solar-Log™ Easy Installation
    The inverter detection and the Internet logon start immediately. The installation status is shown on the LCD-Status-Display. The manual configuration of the Solar-Log™ can be performed via the WEB interface. Easy Installation is compatible with the Solar-Log™ WEB “Commercial Edition” and “Classic 2nd Edition”.
    Smart Energy
    Self-consumption can be measured and displayed as a graph with a energy meter. Smart Energy logics activate and deactive individual appliances depending on the amount available energy.
    Add to cart
  • R10,783.17

    Solar-Log 1200 Monitoring System <100kW

    The beautifully shaped device for failure and yield monitoring with a TFT color touch screen and a smaller LCD display.
    Plant size
    Solar-Log 1200 is compatible with all current inverters. It is possible to connect several inverters for maximum of two manufacturers and a total plant power of 100 kWp.
    Functions
    Solar-Log™ Easy Installation
    The installation and initial setup is automatic. The inverter detection and the Internet logon start immediately. The installation status is shown on the LCD Display. The manual configuration of the Solar-Log™ can be performed via the WEB interface. Easy Installation is compatible with the Solar-Log™ WEB “Commercial Edition” and “Classic 2nd Edition”.
    Smart Energy
    Self-consumption can be measured and displayed as a graph with a energy meter. Smart Energy logics activate and deactive individual appliances depending on the amount available energy.
    Add to cart
  • R11,721.21

    Solar-Log Power Management Package <15kWp 100A supply

    Combine the Solar-Log 300 and the PRO380 energy meter to combine detailed monitoring with power management and export limitation small three phase installations.

    The PRO380 uses CTs to accurately read the current from the supply cable. The package includes three CTs rated at 100A, but you should check to make sure that is sufficient and swap to a higher rated version if neccessary.

    Current clamps should be sized according to incoming grid supply in the property, please check if these are sufficient before buying. Please note larger CTs are available.

    2x CAT5 cables are supplied, shorter 3m for connection between inverter and Solar-Log 300 and longer 10m for connection between Solar-Log 300 and Modbus meter. Please check if these lengths are sufficient and source shorter/longer ones if required.

    Add to cart
  • R16,437.34

    Solar-Log Power Management Package <100kWp 200A supply

    Combine the Solar-Log 1200 and the PRO380 energy meter to combine detailed monitoring with power management and export limitation.

    The PRO380 uses CTs to accurately read the current from the supply cable. The package includes three CTs rated at 200A, but you should check to make sure they are sufficient and swap to a higher rated version if neccessary.

    Current clamps should be sized according to incoming grid supply in the property, please check if these are sufficient before buying. Please note larger CTs are available.

    2x CAT5 cables are supplied, shorter 3m for connection between inverter and Solar-Log 1200 and longer 10m for connection between Solar-Log 1200 and Modbus meter. Please check if these lenghts are sufficient and source shorter/longer ones if required.

    Note: If using with Huawei quad tracker inverters Solar-Log firmware update might be required.

    Add to cart
  • R16,437.34

    Solar-Log Power Management Package <100kWp 200A supply

    Current clamps should be sized according to incoming grid supply in the property, please check if these are sufficient before buying. Please note larger CTs are available.

    2x CAT5 cables are supplied, shorter 3m for connection between inverter and Solar-Log 1200 and longer 10m for connection between Solar-Log 1200 and Modbus meter. Please check if these lenghts are sufficient and source shorter/longer ones if required.

    Note: If using with Huawei quad tracker inverters Solar-Log firmware update might be required.

    Add to cart
  • R18,792.47

    Solar-Log 2000 Monitoring System <2000kW

    Comprehensive evaluation functions and many enhancement options make the Solar-Log 2000 a must for use in demanding situations.
    Plant size
    The Solar-Log 2000 is comfortable monitoring and controlling large-scale PV plants and solar power stations.  The new high-performance top-of-the-line model can monitor a maximum plant size of 2000 kWp and up to 100 inverters. With its master/slave technology, a total of 10 Solar-Log 2000 can be connected together at one plant. This greatly expands the maximum possible plant size.
    Functions
    Self-consumption
    The Solar-Log 2000 offers the option to measure the amount of self-produced power consumed and to present it graphically via the Solar-Log™ WEB “Commercial Edition”. An additional power meter serves as a consumption meter.
    Solar-Log 2000 alarm function
    This provides your plant with anti-theft protection and an external alarm against burglars and vandals.
    Display Options
    TFT-Touch-Display and access to Solar-Log™
    The Solar-Log™ can be operated from a computer with a web browser or directly via the device’s TFT-Touch-Display. The graphical reports of yield data are visualized on the color TFT-Touch-Display and via the web browser. Remote access is possible with the Solar-Log™ WEB “Commercial Edition”.
    Add to cart
  • R23,511.91

    Solar-Log Power Management Package <2MWp 500A supply

    Current clamps should be sized according to incoming grid supply in the property, please check if these are sufficient before buying.

    2x CAT5 cables are supplied, shorter 3m for connection between inverter and Solar-Log 2000and longer 10m for connection between Solar-Log 2000 and Modbus meter. Please check if these lenghts are sufficient and source shorter/longer ones if required.

    Note: If using with Huawei quad tracker inverters Solar-Log firmware update might be required.

    Add to cart