SMA

  • R789.60

    SMA Tigo TS4 Retrofit Module – Optimised

    Enhance your system yield by adding Tigo power modules to only the modules that are affected by shading. Perfect as a low-investment option for getting the most from a roof.

    The Tigo solution comes in two varieties depending on what functionality you need: monitoring only, or full optimisation. The products can be deployed either on individual modules or on the complete system.

    This version, the TS4-R-O, can be added to only the modules in an array that are shaded. If module-level monitoring is required, a TS4-R-M is required on each module.

    As an example if there are eight modules in total, and two are shaded, you could install 2 x TS4-R-O to overcome the shading and 6 x TS4-R-M to enable monitoring for the rest of the modules.

     

    Further information on the SMA website: https://www.sma.de/en/products/smart-module-technology/ts4-r.html

    Add to cart
  • R1,441.30

    SMA 485 Data Module Type B ( for STP-20 only )

    The 485 data module enables you to setup cable-connected RS485 communication and is compatible with the SMA TL-20 range of three phase inverters.

     

    Add to cart
  • R1,441.30

    SMA RS485 Interface

    Compatible with SMA inverters with a low frequency transform SB-1200, SB-1700, SB-3000 and SB-3300 and the transformless inverters SB-1300, SB1600 and SB-2100

     

    Add to cart
  • R1,441.30

    SMA RS485 Interface ( for SB-TL21 & STP-30 )

    Technical Data

    Communication interface RS485

    Maximum wireless range 1,200 m

    Width x height x depth: 33 mm x 62 mm x 34 mm

    Weight 23.8 g

    Installation location SI 8.0H and SI 6.0H

    Add to cart
  • R2,009.51

    SMA Web Connect ( SWDM-10 )

    Webconnect provides free access to Sunny Portal without additional data logger – easily via an existing Internet access and a DSL router. After the simple installation of the inverter interface which is optionally available or already integrated at the factory, you can commission the Webconnect.

    Connections: Ethernet RJ45

    Max. radio range: Ethernet 100 m

    The Webconnect function enables data transmission between the Internet portal Sunny Portal and the inverters. Data transmission takes place via a router with Internet access. A PC with the software Sunny Explorer* is also connected to the router.
    * as of software version 1.04. Sunny Explorer is available free of charge at

    The Webconnect Data Module performs the following tasks:
    • Set-up of a Speedwire network
    • Data exchange with the Internet portal Sunny Portal and Sunny Explorer via a router

    Add to cart
  • R2,262.78

    Speedwire Datamodule for Sunny Island

    Add to cart
  • R2,684.52

    SMA Sunny Beam Bluetooth Repeater

    To extend range of bluetooth data connection between data logger and inverters.

    Capacity: 100 inverters

    Interfaces: Bluetooth radio connection class 1

    Range: 100 m

    Use: Wall-mounted, table top device

    Protection rating: IP20

    Add to cart
  • R3,165.94

    SMA Service Cable

    This USB service cable allows you to connect your PC to the inverter via USB for set-up, programming and faultfinding.

    Whether commissioning or in service – with the USB service interface you can quickly and easily either sort the inverter data or change it. It is equipped with a USB Piggy-Back for the inverter and a USB plug for connection to a PC or laptop. The USB service interface is suitable for Sunny Boys.

    Add to cart
  • R4,088.31

    SMA Sunny View

    The Sunny View has more to offer than just reliable transmission of solar yields: its large, easy-to-read 5″ colour touch screen enables not only the display of all key PV plant data, but also keeps the plant operator updated with news, weather reports and social network messages via WiFi. The device communicates via Bluetooth with up to 12 inverters and will give you by an audio and visual warning signal if any faults occur.

    Add to cart
  • R5,745.06

    SMA Energy Meter 3 phase (<63A)

    Supplier Part No:EMETER-20
    Weight:0.375 kg

    Easy to Use

    ·       Quick plug-and-play installation

    ·       Graphic visualization of current measured values in Sunny Portal and local web UI

    Flexible

    ·       Space-saving, top-hat rail mounting in household distribution thanks to compact enclosure

    ·       Flexible use in applications > 63 A thanks to external current transformers

    ·       Suitable for universal use regardless of existing energy meter

    High Performance

    ·       Fast three-phase, bidirectional reading for effective energy management*

    ·       Ideal coordination with SMA devices to ensure control tasks are carried out stably

    * Can also be used in single-phase systems.

    Add to cart
  • R6,303.34

    SMA Energy Meter for 1 phase with 1x 100A current transformer

    This part is made up of the following items:
    1 x EMETER-20 SMA Energy Meter 3 phase (<63A)
    1 x CT-100A Current Transformer 100A ( incl. fly lead )

    Provides single phase energy measurement for systems up to 100A per phase using 1 x current transformer.

    Add to cart
  • R7,049.09

    Sunny WebBox Bluetooth

    Reliable
    • Remote monitoring, diagnosis and
    configuration of the PV plant
    • Data logger for all key plant data
    • Rapid detection of operational
    failures

    Simple
    • Automatic monitoring of up to 50
    inverters via SMA Bluetooth®
    • Fast set-up thanks to Sunny WebBox
    Assistant and quick reference guide

    • Wireless connection to the Sunny
    SensorBox also possible

    User-friendly
    • Including free standard access for
    Sunny Portal for the entire service
    life of the plant
    • Easier data evaluation due to FTP
    push function – even in CSV format

    Add to cart
  • R7,419.90

    SMA Energy Meter 3 phase with 3x current transformers (up to 200A)

    Weight:1.335 kg

    Part No: EMETER-20-3-200A

    SMA from its headquarters in Kassel, Germany, is the world’s largest producer of solar inverters and monitoring systems for photovoltaic applications.  As market leader for solar inverters SMA is setting benchmarks again and again: leading-edge efficiencies of 98% and new technology ensures maximum yields and the highest user convenience.

    Add to cart
  • R10,065.22

    SMA Sunny Home Manager 2.0 (integrated E-meter-20 )

    SUNNY HOME MANAGER 2.0

    The control centre for smart energy management The Sunny Home Manager 2.0 is SMA’s intelligent energy manager and enables the most efficient use of solar energy in the home. It optimises PV self-consumption and significantly reduces electricity costs. To do this, it measures the power of PV generation, purchased electricity as well as grid feed-in, and gives an overview of all relevant energy flows in the household. By means of local PV generation forecasts and the measured household consumption profile, the self-learning device prompts the user with energy-related action recommendations. Operation of the controlled appliances is coordinated in a way to optimise the use of self-generated solar energy.

    The path to intelligent energy management is easy. Simply install the Sunny Home Manager 2.0 at the grid connection point, connect it to the internet router using an Ethernet cable, then register the PV system in Sunny Portal or Sunny Places free of charge and benefit from greater energy efficiency.

    Innovative

    Easy to Use

    Transparent

    Flexible

    Add to cart
  • R10,311.90

    SMA Power management package for systems up to 63A/phase grid

    This part is made up of the following items:
    1 x HM-BT-10 SMA Sunny Home Manager with Bluetooth
    1 x EMETER-20 SMA Energy Meter 3 phase (<63A)
    1 x CAT5E-10M Cat 5e Terminated RJ45 Ivory Shielded – 10m
    1 x CAT5E-3M Cat 5e Terminated RJ45 Ivory Shielded – 3m
    This kit is a full monitoring package for SMA commercial systems that allows full recording and display of energy generation, usage and environmental conditions. Ensures that the complete system is performing at its maximum potential and enables optimisation of energy consumption.

    Subject to the approval of your local DNO this package may be used to limit the power export of the system to a value agreed with the DNO. e.g. a 50kWp PV system with 48kW of inverters could be limited to 40kW of AC export power if that is required by the DNO. During periods of self consumption, e.g. Monday – Friday, sufficient power is likely to be used by the property and so no limitation is applied but during high generation and low self-consumption periods the system will automatically trim the maximum export power to a DNO defined limit. With most commercial buidings this ‘lost’ energy will be a very small percentage of the total annual generation and the benefit of having additional generation capacity most of the time will far outweigh the lost generation during other times.

    2x CAT5 cables are supplied, shorter 3m for connection between inverter and Home Manager and longer 10m for connection between Homemanager and meter. Please check if these lenghts are sufficient and source shorter/longer ones if required.

    Supplied WITHOUT current monitoring clamps, so it is only suitable for installation on properties with up to 63A per phase main AC supply.

    Current clamps (or Home Manager rating) should be sized according to incoming grid supply in the property (not size of the PV array), please check if these are sufficient before buying.

    Add to cart
  • R11,731.90

    SMA Multicluster Box – 12 x Sunny Island ( 50Hz )

    Add to cart