Renusol
-
R28.41Renusol Cross rail connector Black
Add to cartPart No: REN-420083-B Mounting – Cruciforms
The Renusol Cross-Rail Connector is used is pairs to attach perpendicular lengths of Renusol rail, or rail to TriSole frames.
A pair of Cross-Rail Connector are attached either side of the upper rail.
The upper rail should always be of 50mm x 37mm type because it has a small ridge along a third face to allow a connector to clamp on, whereas the 41 x 35 does not. Use any of the following rail partnos: (Silver) REN-500502, REN-500505 or (black) REN-400502-B, REN-400505-B.
-
R43.55Renusol – VarioSole+ Rail connector for rail 41 x 35 mm
Add to cartProduct properties
Dimensions: 195 x 24,1 x 30
Weight: 0.151kg
Rail Length: 195,0mm
Material: Aluminium
Certification: TUV ID:48970; MCS012 IK0197/03
Useable with: VS+ Mounting rail 41 x 35mm
-
R45.91
Renusol – VarioSole+ Rail connector for rail 50 x 37 mm
Add to cartProduct properties
Dimensions: 195 x 27,9 x 38,8mm
Weight:0.193kg
Rail Length: 195,0mm
Material: Aluminium
Certification: TUV ID:48970; MCS012 IK0197/03
Useable with: VS+ Mounting rail 41 x 35mm
-
R48.87Renusol – TriSole+ Vertical Support 10 degrees
Add to cartGeneral
System:Tri-angular module support for pitched and flat roof with roof penetration
Content:Tri-angle (pre-assembled or non-assembled), back support
System warranty: 10 years
Application Area: Pitched roof on commercial, industrial, agricultural
Roof covering:Orthogonal installation to roof slope: min. 2°/max. 25°. Parallel installation with roof slope: min. 2°/max. 45°
Attachement to roof with MS+, MS+P, VS+
-
R55.02
Renusol – TriSole+ Vertical Support 15 degrees
Add to cartGeneral
System:Tri-angular module support for pitched and flat roof with roof penetration
Content:Tri-angle (pre-assembled or non-assembled), back support
System warranty: 10 years
Application Area: Pitched roof on commercial, industrial, agricultural
Roof covering:Orthogonal installation to roof slope: min. 2°/max. 25°. Parallel installation with roof slope: min. 2°/max. 45°
Attachement to roof with MS+, MS+P, VS+
-
R67.06Renusol Seam Clamp E-Mini
Add to cartSeam Clamp E-Mini
Product information
Variosole is a universal, easy to install system for the mounting of framed PV modules on pitched roofs with a roof pitch between 5º and 60º. The connection to the roof is achieved by using the appropriate fittings for the respective roof covering, such as roof hooks or hanger bolts. The modules can be installed horizontally or vertically.
Designer note: The Renusol seam clamps are part of the S5 range.
-
R68.55Renusol – VarioSole Hanger bolt M10 x 200 Wood Substructure
Add to cartRenusol GmbH based in Cologne (Germany) and is among the fastest growing businesses on the European market for PV mounting systems. The manufacturer of high-quality mounting solutions is successful with its 4 core mounting options, VarioSole, MetaSole, InterSole and ConSole in many European countries.
-
R71.43Renusol – Ridge support 10°
Add to cartGeneral
System:Ballasted PV-mounting system
Compontents Ground rails, rail connector, building protection mat, low post, high post, wind deflector, clamps
System warranty: 10 years
Application area: Flat roof on industrial, agricultural and residential buildings
Roof covering:Bitumen, concrete, foil, gravel
Roof slope max. 3° without additional measures
-
R83.03Renusol Seam Clamp K-Grip Mini
Add to cartSeam Clamp K-Grip Mini
The S-5-K Grip clamp was specifically developed to fit Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snap-together profiles. Each insert has a unique shape that allows for a tight fit and provides increased holding strength over other attachment options.
Designer note: The Renusol seam clamps are part of the S5 range.
-
R242.74Renusol – Base rail FS10-EW 2260 mm
Add to cartGeneral
System: Ballasted PV-mounting system
Components: Ground rails, rail connector, building protection mat, low post, high post, clamps System warranty: 10 years
Application area: Flat roof on industrial, agricultural and residential buildings
Roof covering: Bitumen, concrete, foil, gravel
Roof slope: max. 3° without additional measures
-
R253.32VarioSole+ Mounting rail 50 x 37 x 3200mm
Add to cartProduct properties
Supplier Part No:400502
Weight:2.3 kg
Length:3.2 m
Material: Aluminum, stainless steel, coated steel