Display - Energy Meter
-
R1,871.82Solar-Log Split CT 250A
Add to cartFunctions
Local monitoring
Local graphical reports via a web browser
LCD-Status-Display
Status display for installation and operations.
Solar-Log™ Easy Installation
The inverter detection and Internet registration are carried out immediately. The installation
mode is indicated on the LCD-Status-Display. It is possible to configure the Solar-Log® via
the PC Web interface. -
R2,001.26
Solar-Log Split CT 100A
Add to cartFunctions
Local monitoring
Local graphical reports via a web browser
LCD-Status-Display
Status display for installation and operations.
Solar-Log™ Easy Installation
The inverter detection and Internet registration are carried out immediately. The installation
mode is indicated on the LCD-Status-Display. It is possible to configure the Solar-Log® via
the PC Web interface. -
R2,009.51SMA Web Connect ( SWDM-10 )
Add to cartWebconnect provides free access to Sunny Portal without additional data logger – easily via an existing Internet access and a DSL router. After the simple installation of the inverter interface which is optionally available or already integrated at the factory, you can commission the Webconnect.
Connections: Ethernet RJ45
Max. radio range: Ethernet 100 m
The Webconnect function enables data transmission between the Internet portal Sunny Portal and the inverters. Data transmission takes place via a router with Internet access. A PC with the software Sunny Explorer* is also connected to the router.
* as of software version 1.04. Sunny Explorer is available free of charge atThe Webconnect Data Module performs the following tasks:
• Set-up of a Speedwire network
• Data exchange with the Internet portal Sunny Portal and Sunny Explorer via a router -
R3,646.41Solar-Log 3 Phase Meter, MID, RS485 Current Transformer-connected
Add to cartA power meter relays the measured amount of power to the Solar-Log™ for analysis.
If you wish to consume the self-produced power from a PV plant, the meter serves as a consumption meter, displaying a comparison of the power produced and consumed.
The meter can be configured to operate with the Solar-Log™ in three different modes:
- Measuring power consumption for the optimal utilization of self-produced power.
- Measuring the total amount of power that has been fed into the grid.
- Measuring the power production from inverters that are not directly supported by Solar-Log
This is the CT version of the PRO380 energy meter.
Use the Solar-Log CTs with this meter; rated from 100-500A.
-
R5,745.06SMA Energy Meter 3 phase (<63A)
Add to cartSupplier Part No:EMETER-20Weight:0.375 kgEasy to Use
· Quick plug-and-play installation
· Graphic visualization of current measured values in Sunny Portal and local web UI
Flexible
· Space-saving, top-hat rail mounting in household distribution thanks to compact enclosure
· Flexible use in applications > 63 A thanks to external current transformers
· Suitable for universal use regardless of existing energy meter
High Performance
· Fast three-phase, bidirectional reading for effective energy management*
· Ideal coordination with SMA devices to ensure control tasks are carried out stably
* Can also be used in single-phase systems.
-
R6,022.11Solar-Log 300 Monitoring System <15kW
Add to cartThe low cost failure and yield monitoring system for plants with a maximum power of 15 kWp. Includes alarm function and graphic evaluation on PC.Plants sizeThe Solar-Log 300 can be installed in plants with a maximum total power of 15 kWp, regardless of the number of inverters. Therefore, this new model can monitor smaller plants with two or three inverters of the same manufacturers without any problems.FunctionsSolar-Log™ Easy InstallationThe inverter detection and the Internet logon start immediately. The installation status is shown on the LCD-Status-Display. The manual configuration of the Solar-Log™ can be performed via the WEB interface. Easy Installation is compatible with the Solar-Log™ WEB “Commercial Edition” and “Classic 2nd Edition”.Smart EnergySelf-consumption can be measured and displayed as a graph with a energy meter. Smart Energy logics activate and deactive individual appliances depending on the amount available energy. -
R6,303.34SMA Energy Meter for 1 phase with 1x 100A current transformer
Add to cart -
R7,419.90SMA Energy Meter 3 phase with 3x current transformers (up to 200A)
Add to cartWeight:1.335 kg
Part No: EMETER-20-3-200A
SMA from its headquarters in Kassel, Germany, is the world’s largest producer of solar inverters and monitoring systems for photovoltaic applications. As market leader for solar inverters SMA is setting benchmarks again and again: leading-edge efficiencies of 98% and new technology ensures maximum yields and the highest user convenience.
-
R10,783.17Solar-Log 1200 Monitoring System <100kW
Add to cartThe beautifully shaped device for failure and yield monitoring with a TFT color touch screen and a smaller LCD display.Plant sizeSolar-Log 1200 is compatible with all current inverters. It is possible to connect several inverters for maximum of two manufacturers and a total plant power of 100 kWp.FunctionsSolar-Log™ Easy InstallationThe installation and initial setup is automatic. The inverter detection and the Internet logon start immediately. The installation status is shown on the LCD Display. The manual configuration of the Solar-Log™ can be performed via the WEB interface. Easy Installation is compatible with the Solar-Log™ WEB “Commercial Edition” and “Classic 2nd Edition”.Smart EnergySelf-consumption can be measured and displayed as a graph with a energy meter. Smart Energy logics activate and deactive individual appliances depending on the amount available energy. -
R18,792.47Solar-Log 2000 Monitoring System <2000kW
Add to cartComprehensive evaluation functions and many enhancement options make the Solar-Log 2000 a must for use in demanding situations.Plant sizeThe Solar-Log 2000 is comfortable monitoring and controlling large-scale PV plants and solar power stations. The new high-performance top-of-the-line model can monitor a maximum plant size of 2000 kWp and up to 100 inverters. With its master/slave technology, a total of 10 Solar-Log 2000 can be connected together at one plant. This greatly expands the maximum possible plant size.FunctionsSelf-consumptionThe Solar-Log 2000 offers the option to measure the amount of self-produced power consumed and to present it graphically via the Solar-Log™ WEB “Commercial Edition”. An additional power meter serves as a consumption meter.Solar-Log 2000 alarm functionThis provides your plant with anti-theft protection and an external alarm against burglars and vandals.Display OptionsTFT-Touch-Display and access to Solar-Log™The Solar-Log™ can be operated from a computer with a web browser or directly via the device’s TFT-Touch-Display. The graphical reports of yield data are visualized on the color TFT-Touch-Display and via the web browser. Remote access is possible with the Solar-Log™ WEB “Commercial Edition”.