• Phocos-CML-10-12-24Volt-10AmpPhocos_cml-series_20A_12-24v Solar Charge Controller

    Phocos CML20 PWM 20A 12V/24V Charge Controller

    Guarantee/ Warranty 12-month product warranty
    Charge Controller Type PWM
    Charge Controller Amps 20 Amps
    Maximum Input Voltage 30Vdc in 12Vdc System, 50Vdc in 24Vdc System
    Output Voltage 12Vdc, 24Vdc
    Product Dimensions 8 x 10 x 3.2 cm
    Weight 0.16 Kg

     

  • Victron - BlueSolar PWM-Light Charge Controller 12/24V-5A
    R350.96

    Victron – BlueSolar PWM-Light 5A 12/24V Charge Controller

    IMPORTANT
    • Always connect the batteries first.
    • Use for 12V battery system only 12V (36 cells) solar
    panel array.
    • Use for 24V battery system only 24V (72 cells) solar
    panel array.

  • STECA-SOLSUM-10.10F.PWM Charge Controller
    R368.81

    STECA Solsum 8.8F PWM – 8A -12/24V Charge Controller

    STECA SOLSUM PWM
    SOLSUM-8.8F – PWM Charge Controller

    • System voltage 12V (24V)
    • 96W (192W)
    • Module current 8A
    • Load current 8A
    • Weight 0.15 Kg
    • Without display
  • BlueSolar PWM-Light 48V 20A Controller
    R420.77

    Victron – BlueSolar PWM-Light 10A 12/24V Charge Controller

    The BlueSolar Charger series uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm. This leads to superior charging and enhanced battery performance. The filtered PWM power control system uses highly efficient and reliable power MOSFET transistors.

    Fully automatic temperature compensation of charge voltage is available to improve charge control and battery performance.

     

  • R491.52

    Victron – BlueSolar PWM-Pro Charge Controller 12/24V-5A

    The Victron BlueSolar PWM-Pro series is ready for use and power generation with its default settings. Its settings also is fully programmable.

    Three stage battery charging (bulk, absorption, float), fully programmable.
    Integrated battery monitor function (Remote Panel needed to display state of charge).
    Load output with low voltage disconnect and manual control (default setting).
    Optional external temperature sensor.
    Load output protected against over load and short circuit.
    Protectection against reverse polarity connection of the solar panels and/or battery.
    Intergrated lighting control function which is fully programmable.
    Day/night timing options: see manual Remote Panel for details.

  • R537.80

    Victron – Shunt 500A/50mV

  • BlueSolar PWM-Light 48V 20A Controller
    R561.34

    Victron – BlueSolar PWM-Light 20A 12/24V Charge Controller

    The BlueSolar Charger series uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm. This leads to superior charging and enhanced battery performance. The filtered PWM power control system uses highly efficient and reliable power MOSFET transistors.

    Fully automatic temperature compensation of charge voltage is available to improve charge control and battery performance.

     

     

  • R561.46

    Victron – BlueSolar PWM-Pro Charge Controller 12/24V-10A

    The Victron BlueSolar PWM-Pro series is ready for use and power generation with its default settings. Its settings also is fully programmable.

    Three stage battery charging (bulk, absorption, float), fully programmable.
    Integrated battery monitor function (Remote Panel needed to display state of charge).
    Load output with low voltage disconnect and manual control (default setting).
    Optional external temperature sensor.
    Load output protected against over load and short circuit.
    Protectection against reverse polarity connection of the solar panels and/or battery.
    Intergrated lighting control function which is fully programmable.
    Day/night timing options: see manual Remote Panel for details.

  • R710.26

    Victron – Remote Meter for BlueSolar 12/24V-20A

    IMPORTANT
    • Always connect the batteries first.
    • Use for 12V battery system only 12V (36 cells) solar
    panel array.
    • Use for 24V battery system only 24V (72 cells) solar
    panel array.

  • R772.72

    Victron – BlueSolar PWM-Light Charge Controller 12/24V-30A

    The BlueSolar Charger series uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm. This leads to superior charging and enhanced battery performance. The filtered PWM power control system uses highly efficient and reliable power MOSFET transistors.

    Fully automatic temperature compensation of charge voltage is available to improve charge control and battery performance.

     

     

  • R842.56

    Victron – Remote panel for BlueSolar PWM-Pro Charge Controller

    Programmable
    The BlueSolar PWM-Pro series is ready for use with its default settings.
    It also is fully programmable:
    – With help of a computer and software (available free of charge from our website)
    – With the dedicated BlueSolar Pro Remote Panel (see features below).
    Features
    – Lighting control function, fully programmable.
    – Three stage battery charging (bulk, absorption, float), fully programmable.
    – Integrated battery monitor function (Remote Panel needed to display state of charge).
    – Load output with low voltage disconnect and manual control (default setting).
    – Optional external temperature sensor.
    – Load output protected against over load and short circuit.
    – Protected against reverse polarity connection of the solar array and/or battery.

  • BLUESOLAR-PWM-LIGHT-48V-20A
    R842.56

    Victron – BlueSolar PWM-Light Charge Controller 48V-10A

    The BlueSolar Charger series uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm. This leads to superior charging and enhanced battery performance. The filtered PWM power control system uses highly efficient and reliable power MOSFET transistors.

    Fully automatic temperature compensation of charge voltage is available to improve charge control and battery performance.

     

     

  • R983.12

    Victron – BlueSolar PWM-Pro Charge Controller 12/24V-20A

    The Victron BlueSolar PWM-Pro series is ready for use and power generation with its default settings. Its settings also is fully programmable.

    Three stage battery charging (bulk, absorption, float), fully programmable.
    Integrated battery monitor function (Remote Panel needed to display state of charge).
    Load output with low voltage disconnect and manual control (default setting).
    Optional external temperature sensor.
    Load output protected against over load and short circuit.
    Protectection against reverse polarity connection of the solar panels and/or battery.
    Intergrated lighting control function which is fully programmable.
    Day/night timing options: see manual Remote Panel for details.

  • STECA-SOLSUM-10.10F.PWM Charge Controller
    R992.80

    STECA Solsum 10.10F PWM – 10A – 12/24V Charge Controller

    STECA SOLSUM PWM
    SOLSUM-10.10F – PWM Charge Controller

    • System voltage 12V (24V)
    • 120W (240W)
    • Module current 10A
    • Load current 10A
    • Weight 0.15 Kg
    • Without display
  • STECA-PR3030-Charge-Controller
    R992.80

    STECA PR1010 PWM – 10A – 12/24V Charge Controller

    STECA PR PWM
    PR1010 – PWM Charge Controller

    • System voltage 12V (24V)
    • 120W (240W)
    • Module current 10A
    • Load current 10A
    • Weight 0.35 Kg
    • With display
  • Steca Solarix PRS3030 PWM Charge Controller
    R1,034.46

    STECA Solarix PRS 3030 PWM – 30A – 12/24V Charge Controller

    STECA SOLARIX PRS
    STECA-PRS3030 – PWM Charge Controller

    • System voltage 12V (24V)
    • 360W (720W)
    • Module current 30A
    • Load current320A
    • Weight 0.345 Kg
    • Without display