Solar Regulators
-
OutBack Flexmax 60 MPPT Charge Controller
Rated Amperage: 60Amps|80Amps
Rated Voltage: 12/24/36/48Volts
With Meter
-
OutBack Flexmax 80 MPPT Charge Controller
Rated Amperage: 60Amps|80Amps
Rated Voltage: 12/24/36/48Volts
With Meter
-
MCare – MPPT Solar Regulator LCD – 150VDC Max
20Amp 12-48v|40Amp 12-48v|60Amp 12/24/36/48v|100Amp 12/24/36/48v MPPT Solar Regulator
LCD Display
MAX Solar Input of 150VDC
3 Year Warranty -
MCare – MPPT Solar Regulator LED – 50VDC Max
10Amp 12/24v|20Amp 12/24v|30Amp 12/24v MPPT Solar Regulator
LED Display
MAX Solar Input of 50VDC
3 Year Warranty -
Phocos CML20 PWM 20A 12V/24V Charge Controller
Guarantee/ Warranty 12-month product warranty Charge Controller Type PWM Charge Controller Amps 20 Amps Maximum Input Voltage 30Vdc in 12Vdc System, 50Vdc in 24Vdc System Output Voltage 12Vdc, 24Vdc Product Dimensions 8 x 10 x 3.2 cm Weight 0.16 Kg -
R350.96
Victron – BlueSolar PWM-Light 5A 12/24V Charge Controller
IMPORTANT
• Always connect the batteries first.
• Use for 12V battery system only 12V (36 cells) solar
panel array.
• Use for 24V battery system only 24V (72 cells) solar
panel array. -
R420.77
Victron – BlueSolar PWM-Light 10A 12/24V Charge Controller
The BlueSolar Charger series uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm. This leads to superior charging and enhanced battery performance. The filtered PWM power control system uses highly efficient and reliable power MOSFET transistors.
Fully automatic temperature compensation of charge voltage is available to improve charge control and battery performance.
-
R468.97
SolarEdge Temperature sensor PSU 24V/1A
Connect environmental sensors to the SolarEdge Control and Communication Gateway for monitoring of your site.Used to calculate site performance ratio -
R491.52
Victron – BlueSolar PWM-Pro Charge Controller 12/24V-5A
The Victron BlueSolar PWM-Pro series is ready for use and power generation with its default settings. Its settings also is fully programmable.
Three stage battery charging (bulk, absorption, float), fully programmable.
Integrated battery monitor function (Remote Panel needed to display state of charge).
Load output with low voltage disconnect and manual control (default setting).
Optional external temperature sensor.
Load output protected against over load and short circuit.
Protectection against reverse polarity connection of the solar panels and/or battery.
Intergrated lighting control function which is fully programmable.
Day/night timing options: see manual Remote Panel for details. -
R537.80
Victron – Shunt 500A/50mV
Add to cart -
R561.34
Victron – BlueSolar PWM-Light 20A 12/24V Charge Controller
The BlueSolar Charger series uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm. This leads to superior charging and enhanced battery performance. The filtered PWM power control system uses highly efficient and reliable power MOSFET transistors.
Fully automatic temperature compensation of charge voltage is available to improve charge control and battery performance.
-
R561.46
Victron – BlueSolar PWM-Pro Charge Controller 12/24V-10A
The Victron BlueSolar PWM-Pro series is ready for use and power generation with its default settings. Its settings also is fully programmable.
Three stage battery charging (bulk, absorption, float), fully programmable.
Integrated battery monitor function (Remote Panel needed to display state of charge).
Load output with low voltage disconnect and manual control (default setting).
Optional external temperature sensor.
Load output protected against over load and short circuit.
Protectection against reverse polarity connection of the solar panels and/or battery.
Intergrated lighting control function which is fully programmable.
Day/night timing options: see manual Remote Panel for details. -
R710.26
Victron – Remote Meter for BlueSolar 12/24V-20A
IMPORTANT
• Always connect the batteries first.
• Use for 12V battery system only 12V (36 cells) solar
panel array.
• Use for 24V battery system only 24V (72 cells) solar
panel array. -
R726.18
Victron SmartSolar Pluggable Display
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
-
R772.72
Victron – BlueSolar PWM-Light Charge Controller 12/24V-30A
The BlueSolar Charger series uses Pulse Width Modulation (PWM) charge voltage control combined with a multistage charge control algorithm. This leads to superior charging and enhanced battery performance. The filtered PWM power control system uses highly efficient and reliable power MOSFET transistors.
Fully automatic temperature compensation of charge voltage is available to improve charge control and battery performance.