Solar Mounting Systems
-
R21.35
Renusol – End Clamp+ 30-50mm Silver module clip
Renusol End Clamp+ 30-50mm Silver
Part No: REN-420081Specification:
Dimensions: 35 x 40 x 60mm
Weight: 0,065kg
Set: Preassembled
Material: Aluminium, Corrosion resistant steel
Module Types: Framed modules
Module Thickness: 30,0 – 50,0 mm
Max Torque: 12,00 Nm
Drive: Hexagon socket 5mm -
R21.35
Renusol – Middle Clamp+ 31-51mm Silver module clip
Technical Data:
Dimensions: 35x40x60
Weight: 0.064kg
Set: complete pre-assembled set
Material: Aluminium; Corrosion resistant steel
Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197
Module Types: Framed modules only
Module Thickness: Between 30.0mm and 50.0mm
Maximum Torque: 12,00 Nm
Driver: Hexagon socket 5mm
-
R27.37
Renusol – RS1 Universal End and Mid clamp 30-50mm module clip
RS1 Universal End and Mid Clamp 30-50mm Silver
Part No: REN-420080
This innovative masterpiece makes your next PV-project a whole lot easier.Features:
• The RS1 works as mid- and end clamp.
• It is height adjustable and secures any framed PV panel starting from 30 mm up to 50 mm height.
• Twisting the RS1‘s head changes the functionality from end- to mid-clamp.
• Installation and positioning work one-handed.
• At the same time, it minimizes needed storage space and saves administration costs in item management.
• The RS1 is a real time saver and generates savings over your entire value chain. -
R27.37
Renusol – Middle Clamp+ 31-51mm Black module clip
Technical Data:
Dimensions: 35x40x60
Weight: 0.064kg
Set: complete pre-assembled set
Material: Aluminium; Corrosion resistant steel
Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197
Module Types: Framed modules only
Module Thickness: Between 30.0mm and 50.0mm
Maximum Torque: 12,00 Nm
Driver: Hexagon socket 5mm
-
R28.41
Renusol Cross rail connector Black
Part No: REN-420083-B Mounting – Cruciforms
The Renusol Cross-Rail Connector is used is pairs to attach perpendicular lengths of Renusol rail, or rail to TriSole frames.
A pair of Cross-Rail Connector are attached either side of the upper rail.
The upper rail should always be of 50mm x 37mm type because it has a small ridge along a third face to allow a connector to clamp on, whereas the 41 x 35 does not. Use any of the following rail partnos: (Silver) REN-500502, REN-500505 or (black) REN-400502-B, REN-400505-B.
-
R36.53
Renusol – End Clamp+ 30 – 50mm Black
Renusol End Clamp+ 30-50mm Black
Part No: REN-420081Specification:
Dimensions: 35 x 40 x 60mm
Weight: 0,065kg
Set: Preassembled
Material: Aluminium, Corrosion resistant steel
Module Types: Framed modules
Module Thickness: 30,0 – 50,0 mm
Max Torque: 12,00 Nm
Drive: Hexagon socket 5mm -
R39.61
Renusol – RS1 Universal End and Mid Clamp 30 – 50mm Black ONE FOR ALL
RS1 Universal End and Mid Clamp 30-50mm Silver
Part No: REN-420080
This innovative masterpiece makes your next PV-project a whole lot easier.Features:
• The RS1 works as mid- and end clamp.
• It is height adjustable and secures any framed PV panel starting from 30 mm up to 50 mm height.
• Twisting the RS1‘s head changes the functionality from end- to mid-clamp.
• Installation and positioning work one-handed.
• At the same time, it minimizes needed storage space and saves administration costs in item management.
• The RS1 is a real time saver and generates savings over your entire value chain. -
R43.55
Renusol – VarioSole+ Rail connector for rail 41 x 35 mm
Product properties
Dimensions: 195 x 24,1 x 30
Weight: 0.151kg
Rail Length: 195,0mm
Material: Aluminium
Certification: TUV ID:48970; MCS012 IK0197/03
Useable with: VS+ Mounting rail 41 x 35mm
-
R45.91
Renusol – VarioSole+ Rail connector for rail 50 x 37 mm
Product properties
Dimensions: 195 x 27,9 x 38,8mm
Weight:0.193kg
Rail Length: 195,0mm
Material: Aluminium
Certification: TUV ID:48970; MCS012 IK0197/03
Useable with: VS+ Mounting rail 41 x 35mm
-
R48.87
Renusol – TriSole+ Vertical Support 10 degrees
General
System:Tri-angular module support for pitched and flat roof with roof penetration
Content:Tri-angle (pre-assembled or non-assembled), back support
System warranty: 10 years
Application Area: Pitched roof on commercial, industrial, agricultural
Roof covering:Orthogonal installation to roof slope: min. 2°/max. 25°. Parallel installation with roof slope: min. 2°/max. 45°
Attachement to roof with MS+, MS+P, VS+
-
R55.02
Renusol – TriSole+ Vertical Support 15 degrees
General
System:Tri-angular module support for pitched and flat roof with roof penetration
Content:Tri-angle (pre-assembled or non-assembled), back support
System warranty: 10 years
Application Area: Pitched roof on commercial, industrial, agricultural
Roof covering:Orthogonal installation to roof slope: min. 2°/max. 25°. Parallel installation with roof slope: min. 2°/max. 45°
Attachement to roof with MS+, MS+P, VS+
-
R67.06
Renusol Seam Clamp E-Mini
Seam Clamp E-Mini
Product information
Variosole is a universal, easy to install system for the mounting of framed PV modules on pitched roofs with a roof pitch between 5º and 60º. The connection to the roof is achieved by using the appropriate fittings for the respective roof covering, such as roof hooks or hanger bolts. The modules can be installed horizontally or vertically.
Designer note: The Renusol seam clamps are part of the S5 range.
-
R68.55
Renusol – VarioSole Hanger bolt M10 x 200 Wood Substructure
Renusol GmbH based in Cologne (Germany) and is among the fastest growing businesses on the European market for PV mounting systems. The manufacturer of high-quality mounting solutions is successful with its 4 core mounting options, VarioSole, MetaSole, InterSole and ConSole in many European countries.
-
R71.43
Renusol – Ridge support 10°
General
System:Ballasted PV-mounting system
Compontents Ground rails, rail connector, building protection mat, low post, high post, wind deflector, clamps
System warranty: 10 years
Application area: Flat roof on industrial, agricultural and residential buildings
Roof covering:Bitumen, concrete, foil, gravel
Roof slope max. 3° without additional measures
-
R81.74
Trisole+ Vertical Support 35 degrees
Renusol – TS+ Support 35° Flat Roof Mounting
Part No: REN-400557This part is the short vertical length of a Renusol TriSole+ frame.
-
R83.03
Renusol Seam Clamp K-Grip Mini
Seam Clamp K-Grip Mini
The S-5-K Grip clamp was specifically developed to fit Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snap-together profiles. Each insert has a unique shape that allows for a tight fit and provides increased holding strength over other attachment options.
Designer note: The Renusol seam clamps are part of the S5 range.